ne8250pe 8-Channels Network-Enabled Class-D Power Amplifier with Protea DSP Signal Processing, Switching Power Supply, 150W RMS Per Channel Into 8 Ohm Loads, Remote Turn On/Off

ne8250pe 8-Channels Network-Enabled Class-D Power Amplifier with Protea DSP Signal Processing, Switching Power Supply, 150W RMS Per Channel Into 8 Ohm Loads, Remote Turn On/Off Connecting and controlling an amplifier for networked systems has now been simplified with Network-Enabled Amplifiers. This line offers ease of use, setup and control using standard 10/100 Ethernet protocol and Protea ne Software. No special outboard control units are needed. Choose either 4-channel ne4250 or 8-channel ne8250 amplifiers are rated at 250W per channel with separate HI-Z and LO-Z models. KEY FEATURES - 10/100 Ethernet comes standard - Minimum power of 150 Watts RMS per channel into 8 Ohm loads and 250 Watts RMS per channel into 4 Ohm loads with all channels operating - DC voltage remote gain control - Ethernet remote control and monitoring - Switch mode supply, Class-D output - Stepped, calibrated input attenuators - Remote turn on/off - Disable all front panel controls via software - Temperature-sensitive variable speed fan with side-to-front airflow - 4-stage level meters - Output current and temp indicators - Safety/Compliance: TUV, CE, FCC,RoHS SPECIFICATIONS - Frequency Response: 20Hz–20kHz, (unweighted) ±1dB - Input Impedance: 20k Ohms, Balanced - Voltage Gain: 26dB - Input Sensitivity: 6.2dBu - Maximum Input Level: +21dBu - Signal to Noise (20-20k, Unweighted): >107db - Distortion (8 Ohm load): (SMPTE) <0.5%, (THD-N) <0.5% (20Hz-20kHz) - Damping Factor (8 Ohms, 1kHz): >250 - Output Circuitry: Class D - AC Main: 120VAC or 240VAC ±10% (factory set), 50–60Hz - Power Cable Connector: 15A Edison, 3-Prong IEC - Airflow: IN through sides, OUT through front - Environmental: 40-120°F noncondensing - Dimensions: 19"W x 3.50"H x 16.84"D - Weight: 24.7 lbs

• 10/100 Ethernet comes standard
• Ethernet remote control and monitoring
• Minimum power of 150 Watts RMS per channel into 8 Ohm loads and 250 Watts RMS per channel into 4 Ohm loads with all channels operating
• Switch mode supply, Class-D output
• Stepped, calibrated input attenuators